Standard Shower Valve Height? (Quick Answer & Adjustment Methods)
If you’re planning an overhaul of your bathroom one of the primary aspects to think about are the plumbing. In addition you must consider specific height requirements related to your shower, which includes the shower valve as well as the showerhead, among other things.
If you’ve never put in an entirely new shower, then these guidelines are crucial to understand If you’re looking for them, you’re in the right spot. We’ll take a look at the kind of the height you should look at when installing a brand new shower valve and what factors you must be aware of before locking it to the wall.
What Is A Shower Valve?
Shower valves serve two main purposes. The first is to regulate the speed of the water that flows from the showerhead, and the second one is to regulate the temperature of the water. There are a variety of shower valves that are accessible to homeowners, such as the following three types:
1. Shower thermostatic valve
Have you ever taken an unplanned shower only to experience the scolding of hot as well as freezing cold cold water that appeared out in the middle of out of the blue? It’s likely due to the fact that someone else in your home is using the water for another purpose at the while you’re taking a bath.
The thermostatic shower valve eliminates the possibility of this being played out. Instead you can set the temperature you want and then leave it for the duration of your life with the assurance that it won’t alter mid-shower.
This shower valve is extremely beneficial if you have small children. While you might be able to anticipate variations in temperature that may occur, they aren’t as likely to be able to anticipate and may be burnt by the sudden surge in boiling hot water.
2. Manual shower valve
This is among the least complicated and traditional shower valves because it comes with only one handle that controls the temperature as well as the speed of water.
This shower valve is the most affordable shower valve that is available therefore if you’re in search of an option that is budget-friendly, then take a look at this. However, it comes with some limitations. Every time you enter the shower, you need to find the ideal balance between temperature and speed and also prevent the abrupt temperature fluctuations we have mentioned earlier.
3. Digital shower valve
It is among the most modern shower valves, and also one of the more expensive. With these kinds of valves, you are able to alter the temperature and flow of water by using an electronically controlled touchpad.
The most appealing aspect of these valves is that you can set a temperature that you want to meet your needs instead of making adjustments by moving a knob in a circular motion until you get the temperature that you prefer.
What Is The Standard Shower Valve Height?
The height of shower valves varies based on the shower you are using in a bathtub or that is free-standing (shower the stall). If you are showering in a tub, the normal height is 28 inches above the floor of your bathroom. If your shower is a stall , the valve should be situated than 48 inches away from the floor.
The reason for the variation in height is because when your shower is situated inside the tub, the valve must connect to the taps in the bath. The taps are quite in the middle of the floor since they are located within the tub within the tub itself.
If you’re in the shower stall the valve won’t require connecting to any other taps . you can use 48″ as the recommended height.
Furthermore, shower valves are made to be easily accessible and accessible. If you’re standing in a shower, it’s not sensible to to lower yourself up to 28 inches to be able to alter the shower’s settings.
While an average of 48 inches (4 feet) is the ideal size for the majority of people to to easily change settings.
The measurements of shower stall valves are only suggestions and are able to be modified in accordance with the needs of the household when it comes to the installation. For instance, if are a home with tall people , then you might be able to raise the elevation of your valve one foot.
What Is The Standard Showerhead Height?
A shower head can be a different factor to be aware of when putting your brand new shower faucet. In general, the typical shower head’s height is approximately 80 inches from the floor. However, this can differ from household to household.
As an example the ceiling height in certain homes is less than other homes, meaning you may not be able reach 80 inches using the head of your shower. However it is possible to live in a home with taller people, which means that you may prefer to raise it more that 80 inches.
In general the majority of plumbers suggest that you set 72 inches for a minimum height, no matter how tall or short you may be because any less than that will have an impact on the direction and angle that water flows out.
The the height of your showerhead may influence the location you’d like to position the valve for your shower. Some individuals choose to set their valve halfway between their shower pan and their showerhead, however it’s not a major factor.
There are a variety of showerhead styles available these days. Here are a few that you ought to consider when you are looking for a new showerhead:
The single-spray showerhead can be described as the type of showerhead that is standard in many homes. It’s fixed and mounted on the wall and is the least expensive showerhead is available. It’s not equipped with extravagant features, it simply does what it is supposed to do and as a minimum prerequisite is all you require to have showerheads.
Showerheads that detach are fantastic because they function as a stationary shower head, which is held in place , or you can unhook it from the hook and place it on your body to get an even more thorough bath. They’re usually connected by a flexible pipe, which allows you to move them around with ease. The only drawback is that they can be loosened when they’re supposed to be held in place and then spray your bathroom in a haze of water.
Shower heads for rain are typically set up on the ceiling, and are angled downwards to the ceiling of the person taking the shower. It gives a rain-like experience in contrast to an ordinary shower head mounted on the wall which shoots water from an angle of diagonal. Showerheads that rain are more expensive than single-spray or detachable heads , yet they give you an comfortable shower experience.
Showerheads with waterfalls are distinctive in the sense that the water pouring out of them does not flow from tiny holes as in normal showerheads. Instead, large swatches water spill over the edge of a ledge that is fitted. Although this is incredibly beneficial, it also uses much more water and is therefore more costly in the longer term. This kind of shower head is best viewed as a luxury alternative to use if you are able to unwind in the shower and shouldn’t be used as the main shower head.
How To Adjust Your Shower Valve Height
If you’ve already put the shower valve however, after a couple of showers, you’ve realized the height doesn’t seem right There are several ways to make it adjustable. The best method is the following:
1. Nail height adjustment
If you use this method, you’ll need grind the valve down , and then replace screws to install a brand new one. Replace the plate the old valve was mounted on by using an adjustable height plate specifically designed for the specific tap.
2. Adjustment of height of screw
This method is used to remove the valve. are going to take off the valve in the same way as you use the height adjustment nail method but you’ll make use of the same screws that were holding the valve in place to install this new one. This shower valve will be screwed in the same space in which the old one was however in a manner that it’s simple to adjust the height.
3. Self-cleaning mechanism
It is an adjustable shower valve in which the valve itself can move both up and down based upon the position of the shower head.
In the end, the level at which that you place your shower valve is contingent on many factors that relate to the piping and your personal preferences. It is first of all dependent on whether you’re fitting the valve to either a tub or shower stall. And the second factor is the height you and others using the valve are. We hope the info we’ve given you to you today will allow you to pick the right shower head and valve to complete your bathroom remodel.